SITE SECTIONS

SFU

MVVDS-S/MVVDS-S2

mvvds-s

It is used as a part of computer-automated test system and designed to give the drive codes to relay command blocks of orbital vehicles computer-aided testing and controlling system, accepts and transforms information about the unit under test condition. Control is maintained with KVV-S controller on PC commands. It’s settled into "Evromechanika " block case.

Technical characteristics
- performs input output operations as a passive component in backup local area network, which is suitable for EIA RS485 interface;
- operates 16-bit control data output channel and 16-bit relay commands block indication data input channel
- level-flight speed on the input-output interface lines is 250 Kbit/s;
- when direct current commutation is 40 mA, output voltage is within the range of 0 – 0,4 V.;
- outputs switching delay time is no more than 8 µs;
- when input current of is within the range of 30-50 mA, input signal voltage with the level " logical 1" is within the range 24 – 34 V.;
- input signal advance time is no more than 1 µs;
- galvanic isolation resistance is no less than 20 mOhm;
- electrical network voltage is 27 (+7,-3) V.;
- maximum consumption current from 27 V. network is no more than 0,5 A;
- overall dimensions, mm: 308х40,3х172,8;
- weight is no more than 0,5 kg.