SITE SECTIONS

SFU

Drilling operation


Targomat IV is designed to make the high-accuracy holes in the layers and pressed MPCB

Targomat IV is designed to make the high-accuracy holes in the layers and pressed MPCB

Dual spindle machine with automatic positioning, centering and drilling.

The field of utilization:
1. Making holes for alignment on the inner layers;
2. Making holes for alignment with the reference signs;
3. Making base holes in the works after the pressing and for the further workpieces locating on the program drilling machines (without X-ray technology utilization);
4. Making technological holes in the workpieces to use them in the processes of circuit image receiving, forming of coat soldermask, visual inspection, scribing, etc.

Automatic and manual operation. Displaying of values on the screen and in the net.

Установка формирования высокоточных отверстий в слоях и спрессованной МПП Targomat IV

Technical parameters

Regulated distance between drilled holes, mm: 220 – 820;
Technological holes position accuracy, mm: < 0,015 (7,5 micrometers);
Target change time (switching to the new workpieces type), sec: less than 30;
Drilled diameter, mm: 1 – 5;
Efficiency, workpieces per hour: 240;
Positioning accuracy, mm: ±0,002;
Repetition, mm: ±0,001;
Maximum thickness of the units, mm: 6;
Minimum thickness of the units, mm: 0,05.


Drilling-and-milling machine CNC-1

Drilling-and-milling machine CNC-1

With the software for printed-circuit boards’ drilling and milling. It has precision controlling of milling depth with the step 0,01 mm.

Technical parameters

Efficiency, holes per hour: up to 50000;
Maximum height of the unit, mm: 42;
Positioning accuracy, mm: ±0,01;
Drilling accuracy, mm: ±0,015;
Data input: through RS232 (all CAD formats);
Format of the data CAD: Excellon, Gerber, Sieb+Meyer;
Memory capacity: 10 000 blocks;








The machine for drilling of 2 holes and pneumatic pinning Spinomatic

The machine for drilling of 2 holes and pneumatic pinning Spinomatic

For the further processing on the drilling and milling machine. It is equipped with a vibrating hopper for automatic pins feeding to operating space. Spindle slide position and back stop are regulated with micrometer screws with digital display of their position.

Technical parameters

Pin diameter, mm: 4 (on request 3, 3.175, 5);
Pin length, mm: minimum 16, maximum 20;
Maximum dimensions of the workpiece, mm: 720x600;
Minimum dimensions of the workpiece, mm: 150x120;
Maximum thickness of the workpiece, mm: 9.